Mechanical equipment has a service life, just to see how the operator operates and how to carry out maintenance work. The maintenance and repair work of the scientific system can prolong the service life of the machine, reduce unnecessary losses in the production work, and avoid the occurrence of faults in the production work. . Let us talk about the maintenance of the transparent film three-dimensional packaging machine.
Every time the 3D transparent packaging machine system runs automatically in the default mode, it will automatically detect first, confirm whether all cylinders are in the reset state. If it is not in the reset state, the system will alarm and all the cylinders will be at the same time. Reset; and when the system switches from the automatic running state to the manual operating state or when the two states are switched over, all cylinders will be automatically reset (ie, angled, pushed, shaped, easy-drawn, folded, folded, cut, The blowing is reset to the initial state).
In order to make the air pressure in a normal state, when the air pressure is insufficient, the system will prompt information to inform the user that the air pressure is insufficient, the system will not start; the whole system provides two emergency switches, once the accident occurs, press The emergency stop button, the system will stop all, all operations are prohibited, until the emergency release button, after the emergency stop button is restored, all operations will be performed. The three-dimensional transparent film packaging machine can be manually fed or coupled with a front-end cartoning machine and a rear-end cartoning machine to form an automatic packaging production line. This greatly improves packaging efficiency, reduces enterprise packaging costs, and improves the grade of enterprise products, thereby enhancing The market competitiveness of products greatly increases the added value of products. The machine is currently the first choice to replace traditional heat shrink packaging, and is the best choice for modern collection packaging. The packaging materials are OPP BOPP film, hot-bonded cellophane and anti-counterfeit gold wire.
If you want to make the 3D transparent film packaging machine more perfect, you can check the equipment regularly, preferably once a month, to keep the room clean and tidy. Do not let the acid and other corrosive gases contained in the atmosphere flow in it. When it is found to be damaged, it should be repaired at any time. Do not let the transparent film packaging machine work again. It is necessary to keep the whole machine clean and tidy, and apply oil to prevent rust. When not in use, cover it with a cloth.