I believe that many mechanical operators know that if the mechanical products are used for a long time, there will be small or small problems. If you want to make the mechanical equipment last longer, you need to carry out maintenance, otherwise it will easily cause mechanical failure. Affects the daily production schedule of the company and causes unnecessary losses. The same is true for the transparent film three-dimensional packaging machine, which should be regularly maintained during use so that it can always maintain the best working condition. Let's take a look at how to maintain and maintain the transparent film three-dimensional packaging machine?
1. Regularly clean and clean the transparent film three-dimensional packaging machine to keep its appearance clean and clean, and prevent external dust and debris from entering the machine through the feeding port, causing pollution to the packaged articles.
2. Always check the joints of the transparent film three-dimensional packaging machine carefully to see if the joints are firmly connected and the parts are used well. If there is any abnormal situation, you should immediately stop working and power off, and promptly notify the maintenance personnel to come to the inspection and repair.
3. Regularly check the cylinder transmission components and sensors to ensure that the cylinders are flexible and ensure that the sensors are always on the same plane and on the same line. If the accuracy and inflexibility caused by the sensor are found, it is necessary to repair or replace the sensor in time.
4. If the transparent film three-dimensional packaging machine is not used for a long time, the measuring bucket and sensor should be removed and protected in time; the exposed part of the piston rod of each cylinder should also be coated with butter to prevent rust stains.