How to extend the service life of soap transparent film 3D packaging machine?
The lifespan of the soap transparent film 3D packaging machine mainly includes the following 10 points:
1. The soap transparent film three-dimensional packaging machine should be used in an environment with a temperature of -10 ℃ -50 ℃, a relative humidity of not more than 85%, no corrosive gases in the surrounding air, no dust, and no explosive danger.
2. The soap transparent film 3D packaging machine is not allowed to be tilted or bumped during transportation, let alone placed upside down for transportation.
3. When the soap transparent film 3D packaging machine is working, it should be ventilated first and then powered on. When stopping, it should be powered off first and then cut off the gas.
4. The working pressure of the soap transparent film 3D packaging machine is generally suitable between 5-6KG, and should not be adjusted too much without special requirements.
5. The soap transparent film 3D packaging machine should ensure that the vacuum pump is working properly, and the vacuum pump motor is not allowed to reverse. The oil level should be checked regularly, and the normal oil level should be at 1/2-3/4 of the oil window (not exceeding).
When there is water or oil color turning black in the vacuum pump of the soap vacuum packaging machine, the new oil should be replaced (usually every one to two months of continuous operation, using 1 # vacuum gasoline or 30 # gasoline or engine oil can also be used).
7. The soap transparent film 3D packaging machine should work continuously for 2-3 months. The back cover should be opened and lubricating oil should be added to the sliding parts and switch blocks. The connecting and moving parts on the heating rod should be lubricated according to usage.
Clean the dust and dirt inside the vacuum pump chamber every six months, clean the fan hood, fan wheel, ventilation grille, and cooling fins (clean with compressed air).
9. Replace the exhaust filter once a year, clean or replace the intake filter (clean with compressed air).
10. On the heating rod of the soap transparent film three-dimensional packaging machine, the second layer of adhesive under the heating plate serves as insulation. If there is any damage, it should be replaced in a timely manner to avoid short circuits.