With the continuous development of automation technology, many enterprises choose automated packaging machinery to package products in order to save costs and improve production efficiency. Moreover, it is an automated mechanical equipment that uses automatic loading, opening, sealing, and scrapping for the automatic box loading machine. Equal packaging form, compact and reasonable structure, simple operation and adjustment; Widely used in multiple fields, effectively improving enterprise production efficiency. Automatic packaging machine is a high-tech product that integrates light, electricity, and gas. It is suitable for automatic packaging of various products. Its working process is the transmission of items; The automatic stretching and conveying of the paper box, which automatically loads materials into the paper box; And completed the complex packaging process of paper tongues at both ends. This article is about the debugging tutorial of an automatic packaging machine. After installation, first debug and produce the machine, turn on the power supply, turn on the power switch on the control panel, press the emergency stop button, and check if all parameters of the display are normal.
Adjustment of packaging box size: mainly adjust the size of the cardboard frame and the chain, and adjust the size of the box frame, length, width, and height of the chain according to the size of the cardboard box. Place the paper box we want to adjust on the box holder, and then adjust the various directions of the box holder to the sides near the box holder. Keep the box stable and don't fall off.
Carton length adjustment: place the sealed carton on the outfeed belt, and then adjust the right hand wheel to make the outfeed belt contact the edge of the carton.
Paper box width adjustment: First, loosen the two sprocket screws on the outer side of the main chain. Next, place a cardboard box in the middle of the chain so that the width of the chain is the same as the width of the box. Next, lock the rear sprocket.
Paper box height adjustment: First loosen the front and rear two compression screws, and then turn the upper handwheel to make the upper guide rail contact the upper part of the paper box with the guide rail. Lock the screws again.
Adjustment of the size of the pushing grid: Unscrew the fixing screws, place the product in the pushing grid, move the baffle left and right, adjust to the appropriate size, and then tighten the screws. Attention: There are several screw holes on the panel here, so be careful not to screw the wrong screws when adjusting.
After each part of the adjustment is completed, the inching switch on the surface of the control board can be started, and manual debugging such as opening the suction cup, feeding, folding, and spraying can be carried out using the inching method. After each operation debugging is completed, the start button can be opened, and then the materials can be put in for normal production.